c
2026 Sun Hydraulics 1 of 4
MODEL
X2CNX2CN
Solenoid-operated, rapid advance and feed flow control
assembly
CAPACITY:CAPACITY: 60 L/min. 60 L/min.
Meter in P
Meter out T
This assembly consists of a needle valve which is a fully-adjustable orifice used to regulate
flow. It is infinitely adjustable from fully closed up to the maximum orifice diameter. It is not
pressure-compensated. It may be used as flow controls or as shutoff valves. The rapid or
feed rate is selected by a solenoid operated (normally open or closed) 2-way, 2-position
valve.
sunhydraulics.com/model/
X2CN
TECHNICAL DATATECHNICAL DATA
Body Type Sandwich
Interface ISO 03
Capacity 60 L/min.
Body Features Meter in P or Meter out T
Stack Height 44,5 mm
Seal Plate Included (see notes) Yes
Control Flow Range 0 - 7 gpm
Model Weight 1.02 kg.
NOTESNOTES
Customer to install locating pin (included) for functional orientation desired.
Stack height value in technical data table includes seal retainer plate.
For detailed information regarding the cartridges contained in this assembly, click on the models codes shown in the
Included Components tab.
Important:Important:
Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the
manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for
pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
c
2026 Sun Hydraulics 2 of 4
MODEL
X2CNX2CN
Solenoid-operated, rapid advance and feed flow control
assembly
CAPACITY:CAPACITY: 60 L/min. 60 L/min.
Continued fromContinued from
previous pageprevious page
(L)(L)CONTROLCONTROL
LL Standard Screw Adjustment
HH Calibrated Handknob with Detent Lock
KK Handknob
(C)(C)ADJUSTMENT RANGEADJUSTMENT RANGE
CC .19 in. (4,8 mm)
DD .09 in. (2,3 mm)
(N)(N)SEAL MATERIALSEAL MATERIAL
NN Buna-N
VV Viton
(F)(F)
1 2 3 4
5 6 7 8
9 10 11 12
(224)(224)COIL *COIL *
224224 DIN 43650 4 pin (Hirschman) 24 VDC
No Coil
* Additional coil options are available
INCLUDED COMPONENTSINCLUDED COMPONENTS
PartPart DescriptionDescription QuantityQuantity
500-001-012* O-Ring 4
700-002* Seal Plate 1
811-001-006* Pin 1
DFCA8DN Cartridge 1
DTAFMHN224 Cartridge 1
NFCCLCN Cartridge - Primary 1
OPTION SELECTION EXAMPLE: X2CNOPTION SELECTION EXAMPLE: X2CNLLCCNNFFAA224224
SOLENOID DESIGNATIONSOLENOID DESIGNATION
FF 740 Coil-Normally Open (with NFCC primary cartridge, Fully adjustable needle valve)
UU 740 Coil-Normally Closed (with NFCC primary cartridge, Fully adjustable needle valve)
TECHNICAL FEATURESTECHNICAL FEATURES
The sharp-edged orifice design minimizes flow variations due to viscosity changes.
A balanced adjustment mechanism allows for easy adjustment even at high pressures.
Because needle valves are non-compensating devices, the fixed orifice size will regulate flow through the valve in proportion to the
square root of the pressure differential across ports 1 and 2.
Now available with FLeX Series solenoid valves. See CONFIGURATION section, SOLENOID DESIGNATION to specify.
MANIFOLD FACESMANIFOLD FACES
FACE GRIDFACE GRID
PRIMARY CARTRIDGE CONFIGURATIONPRIMARY CARTRIDGE CONFIGURATION
c
2026 Sun Hydraulics 3 of 4
Face 2Face 2
Face 5Face 5
Face 6Face 6
c
2026 Sun Hydraulics 4 of 4
Face 7Face 7
Face 8Face 8
Face 10Face 10
